Liquid Optical Brightener

Our consistent efforts and dedication enable us to carve a niche as a most trustworthy organization engaged in offering Liquid Optical Brightener For Paper. It is a good optical brightener for paper and gives optimum results on all kinds of sized papers. We process this liquid under the firm guidance of expert supervisors using high quality compounds. Liquid Optical Brightener For Paper has very good stability to hard water, acid and alkali. We offer this liquid at pocket friendly prices.

Features:

• Has excellent build up property 
• Good fastness
• Excellent stability
  

EUROPAL 2BF LIQUID

OPTICAL BRIGHTENING AGENT FOR PAPER AND GIVES OPTIMUM RESULTS

Good Optical Whitener for Paper and gives optimum results on unsized or sized papers where the pH is above 5.5.

GENERAL PROPERTIES

Applications

IN THE MASS

Europal 2BF Liq. should be added where the stock is vigorously agitated. It can be added directly in the mixing chest where the pH is around 5.5 to get best results. Generally 0.2 - 0.3%. Europal 2BF Liq. of dry pulp is adequate. In special cases 0.6%. Europal 2BF Liq. of dry pulp will be advantageous.

SURFACE COATINGS
IN SIZE COATINGS: The amount required is generally 1.0 - 5 gm/ltr. Europal 2BF Liq. To improve the printing properties of printing and writing paper size solution (reduced starches, CMC etc.) are often applied to the surface on the size press of some other device which may or may not be part of the paper machine. Maximum whiteness is obtained at 7gm/ltr Europal 2BF Liq. (starch base) depending on the prevailing condition and the degree of whiteness.

IN PIGMENTED COATING SLURRIES: Europal 2BF Liq. is particularly suitable for pigmented coating slurries with a starch/latex base due to it's high affinity for the normal range of binders. The quantities required depend on the basic whiteness of the white pigments and binders, the machine speed, the thickness of coating and white effect required. To obtain the maximum white effect the pH of the coating should be kept slightly alkaline (pH 8-9) with concentrated ammonia. The recommended quality is generally 0.5 - 5gm/ltr. depending upon the make up of the coating slurry.

Note:

• Use of the cationic auxiliaries is not desirable as these may get precipitated with the anionic optical brighting agent
• Use of chelating agents such as E.D.T.A. (0.2 gm/ltr) is suggested to prevent interference due to heavy metal ions such as Copper, Iron, Zinc and Magnesium.